Product Details

Under sink 5 in 1

AED 1,499

FREE SHIPPING
FREE MAINTENANCE

Category: Tag:

Share this product

Description

5 stage filtration system:  PP+CTO+UDF+T33+UF
Dimension: 32.5cm * 11cm * 43 cm
Weight: 3Kg

Learn more about the filter:

  1. PP: PP COTTON FILTER
    PP cotton filter is a pretreatment filter, which is used to filter the raw water and filter the sediment, debris, rust and suspension of the water.

Parameters:
Rated net water: 3.7L/min
Rated pressure: 0.4MPa
Applicable water temperature: 4 – 38℃
Applicable water quality: Municipal tap water
Shell material: PP (polypropylene)
Suggested replacement period: 6 – 9 months 

  1. CTO: COMPRESSED ACTIVATED CARBON FILTER

Compressed activated carbon filter can remove the residual oxygen in water, disinfection byproducts, organic matter, humus, harmonia, odor and so on.

Parameters:
Rated net water: 3.7L/min
Rated pressure: 0.4MPa
Applicable water temperature: 4 – 38℃
Applicable water quality: Municipal tap water
Shell material: PP (polypropylene)
Suggested replacement period: 6 – 9 months

  1. UDF: PRE ACTIVATED CARBON FILTER ELEMENT
    Pre-activated carbon filter can effectively adsorb the raw water in the different color, odor, oxygen, halogen and other substances.

Parameters:
Rated net water: 3.7L/min
Rated pressure: 0.4MPa
Applicable water temperature: 4 – 38℃
Applicable water quality: Municipal tap water
Shell material: PP (polypropylene)
Suggested replacement period: 6 – 9 months

  1. T33: REAR COMPOSITE FILTER ELEMENT

Remove the residual chlorine in the water, chemicals, color, smell, and filer fine impurities.

Parameters:
Rated net water: 3.7L/min
Rated pressure: 0.1 – 0.4MPa
Applicable water temperature: 4 – 38℃
Applicable water quality: Municipal tap water
Shell material: PP (polypropylene)
Suggested replacement period: 6 – 9 months

  1. UF: ULTRA FILTRATION MEMBRANE FILTER ELEMENT

Ultra filtration membrane filter can remove solid impurities, suspended solids, colloids, impurities, bacteria, viruses and other harmful substances in water.

Parameters:
Rated net water: 3.7L/min
Rated pressure: 0.1 – 0.4MPa
Applicable water temperature: 4 – 38℃
Applicable water quality: Municipal tap water
Shell material: PP (polypropylene)
Suggested replacement period: 6 – 9 months

WARINESS!

  1. This product only applies to minicipal tap water
  2. This product must be installed by a professional, users do not disassemble themselves
  3. If the water pressure is higher than 0.4Mpa, install the pressure reducing valve in the water inlet
  4. The specific replacement filter cycle according to the actual water quality and water around the identified